Cast Brass 12V LED MR16 Well Light w/ Open Face and PVC Sleeve

New product

12V Outdoor Cast Brass LED MR16 Well Light with Open Face (Fixture only). 13.5" Long Angle Cut PVC Sleeve. Please pair with selected LED Bulb!

More details

$69.95

  • Warm White
  • Cool White

  • 12V outdoor cast brass LED MR16 in ground well light with open face. 13.5" long angle cut PVC Sleeve! These fixtures are constructed of commercial grade heavy duty cast brass from the top to the housing, ensuring many years of worry-free performance in any conditions!  Included angle cut PVC Sleeve allows for an easy, secure installation as well as easy servicing! See below for LED bulb options available for this light:

    1) 12V 3W LED MR16 - Light output equivalent to a 20W halogen MR16. This bulb is non dimmable. This bulb puts out 190 - 220 lumens and is sufficiently bright enough for most landscape lighting applications.  Comes with a 30° beam spread angle, perfect for lighting up tall bushes, trees, walls, etc. 

    2) 12V 6W LED MR16 - Light output equivalent to a 35W halogen MR16. This bulb is great if you feel you might need a bit more power from your lights, or you wish to dim them with a dimmer.  Comes with a 30° beam spread angle, perfect for lighting up tall bushes, trees, walls, etc.  

    3) 12V 8.5W COB LED MR16 - Light output equivalent to a 50+W halogen MR16. This bulb is great if you really need a higher intensity light source, are lighting up a wide area, high wall, etc, and you wish to dim them with a dimmer.  Comes with your choice of a 35° narrow beam spread angle, perfect for lighting up tall bushes, trees, walls, etc., or an 80 wide beam spread angle, perfect for lighting up large bushes, short wide trees, or illuminating a large area of a wall from a short to moderate distance away.  These bulbs are also UL listed! 

    These fixtures are made out of cast brass, they will never rust, chip or corrode from the elements!  

  • Fixture Material Cast Brass with a tempered glass lens and weather-tight silicone gaskets. Included Sleeve is made out of weatherproof PVC,
    Socket Material Top grade porcelain socket with nickel contacts and wired with a 2 ft pigtail SJT direct burial cable
    Wiring Pre-wired with a 2 foot pigtail 18-2 outdoor direct burial cable
    Voltage 12V
    Power Used 3W, 6W or 8.5W
    Equivalent To 3W LED - 20W Halogen; 6W LED - 35W Halogen; 8.5W LED - 50W Halogen
    Beam Angle 30° ~ 80° available depending on bulb desired
    Dimmable 3W - No; 6W - Yes; 8.5W - Yes
    Dimensions FIXTURE - 3.75" Length x 3.88" Diameter. SLEEVE - 13.5" Length x 2.25" Diameter.
    Life Span 50,000 hours
    Warranty 10 years

Accessories

30other products in the same category: