12V Outdoor Composite Polybutylene Terephthalate (PBT) LED MR16 Round Recessed Step & Brick Wall / Ceiling Light with Open Face (Fixture only). Adjustable directional lamp bracket tilts up to 25° for optimum light placement. Please pair with selected LED Bulb!
Warning: Last items in stock!
12V outdoor composite polybutylene terephthalate (PBT) LED MR16 round recessed step & brick wall / ceiling light with open face. Built-in adjustable directional lamp bracket tilts up to 25° for optimum light placement. These fixtures are constructed of commercial grade heavy duty fiberglass from the top to the housing, ensuring many years of worry-free performance in any conditions! See below for LED bulb options available for this light:
1) 12V 3W LED MR16 - Light output equivalent to a 20W halogen MR16. This bulb is non dimmable. This bulb puts out 190 - 220 lumens and is sufficiently bright enough for most landscape lighting applications. Comes with a 30° beam spread angle, perfect for lighting up tall bushes, trees, walls, etc.
2) 12V 6W LED MR16 - Light output equivalent to a 35W halogen MR16. This bulb is great if you feel you might need a bit more power from your lights, or you wish to dim them with a dimmer. Comes with a 30° beam spread angle, perfect for lighting up tall bushes, trees, walls, etc.
3) 12V 8.5W COB LED MR16 - Light output equivalent to a 50+W halogen MR16. This bulb is great if you really need a higher intensity light source, are lighting up a wide area, high wall, etc, and you wish to dim them with a dimmer. Comes with your choice of a 35° narrow beam spread angle, perfect for lighting up tall bushes, trees, walls, etc., or an 80 wide beam spread angle, perfect for lighting up large bushes, short wide trees, or illuminating a large area of a wall from a short to moderate distance away. These bulbs are also UL listed!
These fixtures are made out of polybutylene terephthalate (PBT), they will never rust, chip or corrode from the elements!
|Fixture Material||Composite Polybutylene Terephthalate (PBT) with a tempered glass lens and weather-tight silicone gaskets. Built in adjustable lamp holder tilts up to 25°.|
|Socket Material||Top grade porcelain socket with nickel contacts and wired with a 2 ft pigtail SJT direct burial cable|
|Wiring||Pre-wired with a 2 foot pigtail 18-2 outdoor direct burial cable|
|Power Used||3W, 6W or 8.5W|
|Equivalent To||3W LED - 20W Halogen; 6W LED - 35W Halogen; 8.5W LED - 50W Halogen|
|Beam Angle||30° ~ 80° available depending on bulb desired|
|Dimmable||3W - No; 6W - Yes; 8.5W - Yes|
|Dimensions||4.5" Length x 4.75" Diameter|
|Mounting||Recess mounts into walls, steps, decks, or just about any flat surface with at least about 4.75" of depth to work with.|
|Life Span||50,000 hours|